Sony XR-C7200R Benutzerhandbuch
17
EN
Erasing the entire programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
2
Press (1) (N) repeatedly until “DEL”
appears.
appears.
To erase Programme 2, press (4) (n)
repeatedly until “P2” appears.
repeatedly until “P2” appears.
3
Press (5) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
press (3) (PLAY MODE) for two seconds.
5
Press (SHIFT).
Adding tracks to the programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
To select Programme 2, press (4) (n)
repeatedly until “P2” appears.
repeatedly until “P2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
D E L
--PGM1--
PLAY MODE
ENTER
SUR EQ
P 1
NO Data
PLAY MODE
ENTER
SUR EQ
Track slot number
Note
Once all 12 slots have been filled, “*Mem full*”
appears in the display, and you cannot insert tracks.
appears in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Erasing the tracks in the
programme
programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
MODE) for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P1” above.
To select Programme 2, press (4) (n)
repeatedly until “P2” appears.
repeatedly until “P2” appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
Programme 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
(PLAY MODE) for two seconds.
6
Press (SHIFT).
C D 1
2 4 P1.‚6
PLAY MODE
TRACK
DISC
SUR EQ
Track Slot Number
D E L
- -- P1.‚6
PLAY MODE
TRACK
DISC
SUR EQ
C D 1
2 4 P1.‚2
PLAY MODE
TRACK
DISC
SUR EQ
CD/MD Unit