Wyse Technology wyse vx0le conversion to thinos Benutzerhandbuch

Converting Wyse VX0LE to ThinOS

Step 1: Access the DVD-ROM from the Correct WDM Server

Access the Conversion Software Assembly DVD-ROM from the machine to which you 
installed the WDM Administrator Console (MMC Snap-in). 

Step 2: Copy the WDM VX0LE 128MB ThinOS Conversion Folder (on the DVD-ROM) to 

C:\WDM_Packages 

1. Open the VX0LE 128MB ThinOS Conversion Images folder on the Conversion 

Software Assembly DVD-ROM.

2. Copy the WDM VX0LE 128MB ThinOS Conversion folder (contained in the VX0LE 

128MB ThinOS Conversion Images folder) to C:\WDM_Packages.

Step 3: Register and Deploy the WDM Package

Use WDM to register and deploy the WDM package as you normally would. For more 
information on registering a package from a script file (.rsp), see Administrators Guide: 
Wyse Device Manager

.

Step 4: Attach a Wyse Conversion Label on Each Converted Cloud Client

The conversion kit is supplied with Wyse Conversion Labels that must be attached to each 
cloud client as shown in Figure 8. Be sure you have purchased the amount of labels you 
need.

Failure to install the label may cause delays in service and support. The 
serial number must be given to a Customer Support Technician to validate 
entitlement to support and service from Wyse. Failure to do so will result in 
the original operating system being loaded on the device and is in breach of 
your license agreement.

Step 5: Obtain a Firmware Update

After converting your cloud clients, you must use your 1 Year ThinOS Maintenance (you 
should have received an email from Wyse or your reseller with full instructions) to obtain 
any available firmware update (if you did not receive this email, contact your reseller). 

If you are unfamiliar with updating firmware on your Wyse ThinOS cloud 
client, refer to Wyse Knowledge Base Solution #10566 (go to the Wyse 
Knowledge Base at 

 and search for 10566).