Sony PEG-NZ90 Benutzerhandbuch
65
Using you
r CLIÉ™
handheld with your c
o
m
p
p
uter
Using your CLIÉ™
handheld with
your computer
handheld with
your computer
Follow the procedure below prior to using your CLIÉ handheld with your
computer.
computer.
Step 1: Install the software on your
computer
The “Palm™ Desktop for CLIÉ” software stored on the supplied CD-ROM
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data such as Address
Book on your computer.
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data such as Address
Book on your computer.
b
For details on the system required on a computer, refer to “System required on a
computer” on page 111.
computer” on page 111.
Notes
• Do not simply copy the “Palm™ Desktop for CLIÉ” folder from the supplied CD-
ROM to your computer. To install the software properly, follow the installation
procedure described in this manual.
procedure described in this manual.
• If you use Windows 2000 Professional or Windows XP operating system, log on with
a User Name in the Administrators group before installing the software.
1
Install the software on your computer
2
Connect the cradle to your computer
3
Enter a user name for your CLIÉ handheld
Do not connect the supplied cradle to your computer
before installing the software. The software may not
be installed properly.
before installing the software. The software may not
be installed properly.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •