Sony FS-2570 Benutzerhandbuch

Seite von 222
12  MAINTENANCE & TROUBLESHOOTING 
 12-9
Test acknowledge call received 
The audio alarm sounds; press the [CANCEL] key to silence the alarm. The display 
changes as below. 
ECC : OK
TEST  ACKNOWLEDGEMENT 
FROM COAST : 
001234567 
SAFETY 
NO INFORMATION
 
 
*
 Received message 
*
 
GO TO ALL VIEW
MAR-23-2002-23:59 
 
No response! Try calling again? 
Re-send call: Push the [ENTER] knob and then press the [CALL] key. 
Cancel call: Press the [CANCEL] key to return to the DSC standby screen. 
 
 
12.9 NBDP Terminal Unit Maintenance 
Regular maintenance is important for good performance. A regular maintenance program 
should be established and should at least include the items mentioned below. 
 
12.9.1 Cleaning the equipment 
Wipe of accumulated dust from the terminal unit with a soft cloth. Wipe the LCD carefully 
to prevent scratching, using tissue paper and an LCD cleaner. To remove dirt or salt 
deposits, use an LCD cleaner, wiping slowly with tissue paper so as to dissolve the dirt or 
salt. Change paper frequently so the salt or dirt will not scratch the LCD. Do not use 
solvents such as thinner, acetone or benzene for cleaning; they can remove paint and 
marks or deform the equipment.   
 
12.9.2 Connectors and earth connection 
Periodically check the connectors for proper seating and the earth connection for rust. 
Remove rust to maintain a good ground system. 
 
12.9.3 Floppy disk drive 
Foreign material on the floppy disk drive head can scratch the magnetic material in the 
floppy, resulting in loss of data. Clean the floppy disk drive head regularly with a floppy 
disk drive cleaning disk to prevent erasure of information stored on disks. 
 
offered by Busse-Yachtshop.de      email: info@busse-yachtshop.de