Sony FS-2570 Benutzerhandbuch
2 SSB RADIOTELEPHONE
2-5
2.1.6 Reducing transmitter power
To conserve energy and to minimize possible interference to other stations, reduce the
transmission power. This should be done when using the transceiver in a harbor, near the
shore or close to communication partner (other ship).
1. Rotate the [ENTER] knob to choose LOW, MID or HIGH (whichever is shown) at the
transmission power. This should be done when using the transceiver in a harbor, near the
shore or close to communication partner (other ship).
1. Rotate the [ENTER] knob to choose LOW, MID or HIGH (whichever is shown) at the
top of the screen and then push the [ENTER] knob.
FS-1570 FS-2570
LOW 68 W 70 W
MID 100 W 125 W
HIGH 150 W 250 W
MODE: SSB SIMP HIGH
CH: 200
TX: 2182.0
KHZ
RX: 2182.00
KHZ
VOL
SEN
S
AGC : FAST
IA
2.1A
LOW
MID
HIGH
HIGH
2. Rotate the [ENTER] knob to choose power among LOW, MID and HIGH as
appropriate and then push the [ENTER] knob.
Note: Power amplifier temperature is monitored, and when its temperature rises above a
certain temperature output power is automatically reduced.
2.1.7 Displaying IA, IC, VC or RF
While transmitting, you may display RF (PA output), IA (antenna current), IC (collector
current) or VC (collector voltage), at the lower right corner of the radiotelephone screen.
1. Rotate the [ENTER] knob to choose RF, IA, IC or VC (whichever is displayed) at the
current) or VC (collector voltage), at the lower right corner of the radiotelephone screen.
1. Rotate the [ENTER] knob to choose RF, IA, IC or VC (whichever is displayed) at the
bottom right corner.
2. Push the [ENTER] knob.
MODE: SSB SIMP HIGH
CH: 200
TX: 2182.0
KHZ
RX: 2182.00
KHZ
VOL
SEN
S
AGC : FAST
IA
2.1A
IA
IC
VC
RF
VC
RF
3. Rotate the [ENTER] knob to choose option desired and then push the [ENTER] knob.
offered by Busse-Yachtshop.de email: info@busse-yachtshop.de