Samsung YP-NDU64B Benutzerhandbuch
6
Voice Recording
Recording the voice messages
1
Press the MODE button on the main unit to switch
into the voice mode.
- Voice mode can only be activated in the stop mode.
into the voice mode.
- Voice mode can only be activated in the stop mode.
2
Press the REC button and the voice messages will be
recorded through the microphone.
- Press the Stop button ( ) to stop recording. If you
recorded through the microphone.
- Press the Stop button ( ) to stop recording. If you
repeat this operation over and over, the voice
messages will be recorded in the sequence of
V001, V002....V00N.
messages will be recorded in the sequence of
V001, V002....V00N.
N
No
ottee
- This feature allows you to easily record lectures at school or
institute, interview and conference messages, etc. It therefore
enhances study effectiveness and lets you keep important
things for a long time.
enhances study effectiveness and lets you keep important
things for a long time.
- The player will automatically stop recording when the memory
becomes full.
- The voice messages are recorded on the built-in memory. If the
memory is short in capacity, however, they will be recorded on
the smart media card (in the sequence of V001, V002... V00N).
the smart media card (in the sequence of V001, V002... V00N).
- Be careful not to press the Erase button long because the
erasing function may run.
- Voice recording is made only on the main system.
Playing the recorded voice messages
1
Use the FF (
) and REW (
) buttons to select the
track (V001, V002...) you prefer.
2
Press the
button to playback the selected track.
You can pause the track by pressing the
button
once again.
- Press the
- Press the
button again to resume playback.
N
No
ottee
- When you press the
button without selecting V001,
V002... V00n, you can listen to the recorded track that applies
to the number currently shown on the LCD panel.
to the number currently shown on the LCD panel.
- Press the FF or REW button during playback to move forward
or in reverse at a faster speed.
Playing the recorded voice messages
1
Use the FF and REW buttons to select the track (V001,
V002...) you want to erase.
V002...) you want to erase.
2
Press the ERASE button for at least 1 second and the
message "Erase?" will appear on the LCD panel. Then
press the
message "Erase?" will appear on the LCD panel. Then
press the
button to erase the selected track.
N
No
ottee
- To cancel the erasing function press the
button.
- After the selected track is erased, the player will show the next
track number.
1_eng_nd 00/12/5 1:47 PM Page 6