Roberts Radio CRD40 Benutzerhandbuch

Seite von 36
13
Operating your radio - Search tuning FM
1.  Fully extend the wire aerial.
2. Press 
the 
Standby button [On/Off  button on the remote control] to 
switch on your radio. 
3.  Press and release the Function button until the FM band is se-
lected.
4. Press 
the 
Skip Up button and then press the Auto scan button
your radio will scan in an upwards direction (low frequency to high 
frequency) and stop automatically when it fi nds a station of suffi cient 
strength. 
5.  After a few seconds the display will update. If the FM band is selected 
the display will show the station name if available. The display will 
also show "St" and "RDS" after the station name on the upper line if 
the station is with stereo and RDS function.
6. To 
fi nd other stations press and hold the Autoscan button as before.
7.  To scan the FM band in a downwards direction (high frequency to low fre-
quency) press the Skip Down button and then press Auto scan button.
8.  When the waveband end is reached your radio will recommence tuning 
from the opposite waveband end.
9. Adjust 
the 
Volume  to the required settings.
10.  To switch off your radio press the Standby button.
2
3
4
7
9
10
4,6,7