Roberts Radio CRD-29 Benutzerhandbuch

This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug

(BS1363). If another type of plug is used a 5A fuse should be fitted in the

plug, adaptor or distribution board.

IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.

The  wire  coloured  BLUE  must  be 

connected to the terminal marked N 

or coloured BLACK.
The wire coloured BROWN must be 

connected to the terminal marked L 

or coloured RED.

Do not allow this unit to be exposed to moisture (e.g. dripping or splashing)

or to temperatures exceeding 70 degrees centigrade. It is recommended 

that the DAB band be used wherever possible as better results in terms 

of quality and freedom from interference will usually be obtained than on 

the FM band.

The name plate is located on the underside of the unit.

The CRD-29 will operate from a supply of AC 230volts, 50Hz 

 only.

For your convenience this product is supplied with a plug which is fitted

with a fuse of the appropriate rating. If the plug supplied is not suitable 

for your socket outlet, it should be removed by unscrewing the plug top, 

the terminal screws and removing the cable.
The correct style of plug to suit your household together with a correctly 

rated fuse should be fitted.
 

IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN

IMPORTANT. DO NOT make any connection to the larger terminal which 
is marked with the letter E or by the safety earth symbol 

  or coloured 

Green or Green-and-yellow.
The wires in the mains lead are coloured in accordance with the following 

codes :-

BLUE - NEUTRAL                    BROWN - LIVE

As these colours may not correspond with the coloured markings identifying 

the terminals in your plug, proceed as follows:-

21