Roberts Radio CRD-37 Benutzerhandbuch

11

Dynamic Range Control (also known as DRC) can make quieter sounds 
easier to hear when your radio is used in a noisy environment. This function 
is only available for the DAB waveband.

1. Press 

the 

On/Off button to switch on your clock radio.

2.  Press and release the Menu button until "Station order" appears on 

the display.

3.  Press and release the Tuning Up or Down buttons until the display 

shows "DRC value".

4.  Press and release the Select button to enter adjustment mode. The 

top line of the display will show the currently applied DRC setting. 

5.  Press and release the Tuning Up or Down buttons to select the 

required DRC setting (default is 0) .

 

 

DRC 0  DRC is switched off, Broadcast DRC will be ignored.

 

 

DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

 

 

DRC 1  DRC is set as sent by broadcaster.

6.    Press and release the Select button to confi rm the setting. The display 

will return to radio mode. 

Note: Not all DAB broadcasts are able to use the DRC function. If the 
broadcast does not support DRC, then the DRC setting in the clock radio 
will have no effect.

1

2

3,5

3,5

4,6