Sony UP-DF500 Benutzerhandbuch

A

d

jus
tment

Menu Operation

16

The unit enters the sharpness adjustment mode.

Select the desired level by pressing the 

G or g 

button.

The sharpness can be adjusted among 15 levels 
between 1 and 14 including OFF.
As the * mark is moved towards the right, the 
outline is emphasized.
OFF: The * mark is placed at most left position. 
(Default level)
Pressing the 

g button: Increases the sharpness 

level, and the outline is emphasized.
Pressing the 

G button: Decreases the sharpness 

level, and the outline is blurred.

Press the MENU button.
The adjusted level is executed.
The unit returns to standby status and READY is 
displayed on the LCD.
The unit operates according to the adjusted level 
until these values are modified.

The unit automatically calibrates the printing density 
according to the density curve set.

Press the MENU button.

Display the CALIBRATION menu by pressing the 
F or f button, then press the g button.
The calibration menu is displayed.
The unit enters the automatic calibration mode.

Select the desired calibration type by pressing the 

F 

or 

f button.

1

Display FULL RANGE CAL by pressing the 

F 

or 

f button.

2

Press the EXEC button.
The unit starts printing and during printing, the 
density is automatically calibrated.
The calibration performed at this printing 
becomes effective for the next printing.

The unit can perform a simple calibration each time 
it makes a printout. When this simple calibration is 
selected, the test pattern is printed on the printout. 
The calibration performed at this printing becomes 
effective for the next printing.

Current sharpness

Printout of results of density calibration