Samsung NX 10 Benutzerhandbuch

Using an external flash unit 
(purchased separately)

You can use the A-TTL auto flash mode when you 
attach an external flash unit (SEF20A or SEF42A) to the 
camera.

This section of the user manual was prepared based on 
the model SEF20A flash.

For more details about the external flash units, see the 
flash units user’s manual.

  Install the external flash after removing the 

hot shoe cover.

  Turn on the external flash.

•  The burst mode of external flash is set to 

the TTL auto mode. 

  Make sure the external flash is fully 

charged, and then start shooting.

The flash modes available are determined by the 
camera lens or camera exposure mode you are using.

  Smart Flash Mode

•  The camera automatically adjusts the brightness 

of the flash according to amount of light in the 
surrounding environment.

  Auto

•  The flash operates automatically in dim or dark 

light.

  Auto + Red

•  The flash operates automatically in dim or dark 

light and prevents the red-eye effect.

  Fill in

•  The flash operates whenever you take a picture 

and its brightness is controlled automatically.

  Fill-in Red

•  Always operates the flash light, and prevents the 

red-eye effect.

  1st Curtain

•  The flash operates immediately after the shutter 

opens.

  2nd Curtain

•  The flash operates just before the shutter closes.

Taking a picture in a dark place

•  Only a flash device manufactured for the NX series 

automatically adjusts the brightness of the flash. 
To enjoy the auto mode functions, please use the 
flash manufactured for NX models. Although the 
flash fires without the battery being fully charged, we 
recommend using the flash only after you charge the 
battery fully.

•  If an external flash unit has a flash control function, 

the light control value of the external flash is applied 
when you connect it to the camera.