Roper ES Benutzerhandbuch

8 

 

1.  Connect either end of the CoolSNAP IEEE-1394 cable to the CoolSNAP 

IEEE-1394 interface card that you have installed in the host computer. 

2.  Connect the other end of the CoolSNAP IEEE-1394 interface cable to either 

DATA connector located on the back of the camera (shown below). 

 

The following connectors and display lights are located on the back of the 
CooSNAP camera.  

•  DATA connectors: 6-pin IEEE-1394 connectors for data transfer and 

power. 

•  EXPOSE OUT connector: BNC connector; the signal at the BNC 

connector will go to a TTL high level when the exposure begins; useful 
for synchronizing an external shutter in the illumination pathway; will 
not power the shutter. 

•  XFER display light: amber LED illuminates during data transfer. 
•  PWR display light: green LED illuminates when camera is powered on. 
•  EXT PWR connector: 5.5 x 2.1 mm DC jack for auxiliary CoolSNAP 

power supply.