Sony DSCT5R Benutzerhandbuch
92
Enable printer to connect
•
[USB Connect] is set to [PictBridge],
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
however the camera is connected to a
non-PictBridge compliant device.
Check the device.
•
The connection is not established.
Disconnect and connect the cable for
multi-use terminal again. If an error
message is indicated on the printer, refer
to the operating instructions supplied
with the printer.
Disconnect and connect the cable for
multi-use terminal again. If an error
message is indicated on the printer, refer
to the operating instructions supplied
with the printer.
Connect to PictBridge device
•
You tried to print images before the
printer connection was established.
Connect to a PictBridge compliant
printer.
printer connection was established.
Connect to a PictBridge compliant
printer.
No printable image
•
You tried to execute [DPOF image]
without placing a DPOF (Print order)
mark on the image(s).
without placing a DPOF (Print order)
mark on the image(s).
•
You tried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
Paper error
No Paper
Ink error
Low Ink
No Ink
•
Check the printer.
Printer error
•
Check the printer.
•
Check if the image you want to print is
corrupted.
corrupted.
•
The data transmission to the printer may
not be completed yet. Do not disconnect
the cable for multi-use terminal.
not be completed yet. Do not disconnect
the cable for multi-use terminal.
Processing
•
The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.
job. You cannot print until it is finished.
This may take time, depending on the
printer.