VIVOTEK IP7135 Benutzerhandbuch

 

 

 

 

 
 

 

 

  

www.vivotek.com 

 

 

 

 
 

 

In this manual, "User" refers to whoever has access to the Network Camera, and 
"Administrator" refers to the person who can configure the Network Camera and grant 
user access to the camera. 

 

Please verify that your product package contains all the 
accessories listed in the foregoing Package Contents.  
Depending on the user’s application, an Ethernet cable 
may be needed. The Ethernet cable should meet the specs 
of UTP Category 5 and not exceed 100 meters in length. 
 

Upon powering up, the front blue LED will become lighted first and then the device will go 
through booting process.    During the booting process, both blue and red LEDs will be on 
and the Network Camera will standby for getting IP address. After getting IP Address, the 
LED will blink blue every second. 
 
The Network Camera will first detect Ethernet. During the process, the red LED of the 
Network Camera will flash every second. Operating in either network mode, the blue LED 
will flash every second as heartbeat to indicate alive. 
 
 
 

 Connect the power adapter jack to the Network 

Camera before plugging in to the power socket. This will 
reduce the risk of accidental electric shock.