Allied International V2.4.0 Benutzerhandbuch
Configuration of the camera
OSCAR Technical Manual V2.4.0
177
Version information register
The presence of each of the following features can be queried by the 0 bit of
the corresponding register.
the corresponding register.
This register holds information about the node_hw_version, the
node_sw_version and the node_spec_ID (camera type). µC version and FPGA
version are bcd-coded, which means that e.g. firmware version 0.85 is read
as 0x0085.
node_sw_version and the node_spec_ID (camera type). µC version and FPGA
version are bcd-coded, which means that e.g. firmware version 0.85 is read
as 0x0085.
The FPGA type ID (= camera type ID) identifies the camera type with the help
of the following list:
of the following list:
Note
L
Always activate advanced features before accessing them.
Note
L
•
Currently all registers can be written without being
activated. This makes it easier to operate the camera
using Directcontrol.
activated. This makes it easier to operate the camera
using Directcontrol.
•
AVT reserves the right to require activation in future
versions of the software.
versions of the software.
Register
Name
Field
Bit
Description
0xF1000010
VERSION_INFO1
µC type ID
[0..15]
Reserved
µC version
[16..31]
Bcd-coded version number
0xF1000014
[0..31]
Reserved
0xF1000018
VERSION_INFO3
Camera type ID
[0..15]
See below
FPGA version
[16..31]
Bcd-coded version number
0xF100001C
[0..31]
Reserved
Table 81: Advanced register: Version information
ID (decimal)
Camera type
1
F145b
2
F145c
3
F201b
4
F201c
5
F145b-1
Table 82: Camera type ID list