Allied International V2.4.0 Benutzerhandbuch
Configuration of the camera
OSCAR Technical Manual V2.4.0
188
Shading correction
Owing to technical circumstances, the interaction of recorded objects with
one another, optical effects and lighting non-homogeneities may occur in
the images.
one another, optical effects and lighting non-homogeneities may occur in
the images.
Because these effects are normally not desired, they should be eliminated as
far as possible in subsequent image processing. The camera has automatic
shading correction to do this.
far as possible in subsequent image processing. The camera has automatic
shading correction to do this.
Provided that a shading image is present in the camera, the on/off bit can
be used to enable shading correction.
be used to enable shading correction.
The on/off and ShowImage bits must be set for saved shading images to be
displayed.
displayed.
Note
L
Always make sure that the shading image is saved at the
highest resolution of the camera. If a lower resolution is cho-
sen and ShowImage is set to true, the image will not be dis-
played correctly.
highest resolution of the camera. If a lower resolution is cho-
sen and ShowImage is set to true, the image will not be dis-
played correctly.
Register
Name
Field
Bit
Description
0xF1000250
SHDG_CTRL
Presence_Inq
[0]
Indicates presence of this
feature (read only)
feature (read only)
BuildError
[1]
Could not built shading
image
image
---
[2..3]
Reserved
ShowImage
[4]
Show shading data as image
BuildImage
[5]
Build a new shading image
ON_OFF
[6]
Shading on/off
Busy
[7]
Build in progress
---
[8..23]
Reserved
GrabCount
[24..31] Number of images
0xF1000254
SHDG_MEM_CTRL
Presence_Inq
[0]
Indicates presence of this
feature (read only)
feature (read only)
---
[1..4]
Reserved
EnableMemWR
[5]
Enable write access
EnableMemRD
[6]
Enable read access
---
[7]
Reserved
AddrOffset
[8..31]
In bytes
Table 90: Advanced register: Shading