Panasonic PV-L751 Benutzerhandbuch
16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Camera Recording
PAUSE
RECORD
SP
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
• Insert cassette with record tab (page 11).
View recording scene on EVF or LCD
(Liquid Crystal Display) monitor.
(Liquid Crystal Display) monitor.
Recording via EVF or LCD
Monitor
Monitor
1
Press LCD-OPEN to unlock the LCD
monitor. Swing LCD monitor fully open
and adjust viewing angle.
• If you want to record using EVF, close
monitor. Swing LCD monitor fully open
and adjust viewing angle.
• If you want to record using EVF, close
and lock LCD monitor.
2
Set POWER to
CAMERA.
Lens Cover opens.
Power Lamp lights.
• Be sure POWER
CAMERA.
Lens Cover opens.
Power Lamp lights.
• Be sure POWER
is fully turned to
CAMERA position.
CAMERA position.
• EVF or LCD monitor turns on/off by the
POWER switch.
• EVF shuts off when LCD monitor is
opened and turns back on when LCD is
closed.
closed.
• Both EVF and LCD monitor turn on
when LCD is at 180
°
(see above left).
This allows both you and the subject to
view the recording.
view the recording.
3
LCD
: Turn BRIGHT control to
monitor
adjust LCD monitor
brightness level.
brightness level.
EVF
: Look into EVF and adjust
VISION ADJUSTMENT to
your eyesight.
your eyesight.
4
Hold down TAPE SPEED for about 1
second to change tape speed to SP/SLP
(page 11).
second to change tape speed to SP/SLP
(page 11).
5
Press RECORD/
PAUSE to start or
pause recording.
PAUSE to start or
pause recording.
6
Set POWER to
OFF when finished.
OFF when finished.
• To remove the cassette, slide the
TAPE EJECT switch (page 11).
Built-in Twin
Capsule 2-Way
Microphone
System
Capsule 2-Way
Microphone
System
CAUTION :
Rotating partially open LCD
monitor may block cassette door
and damage Camcorder body.
monitor may block cassette door
and damage Camcorder body.
Note:
• When Camcorder is aimed at excessively bright
objects, or bright lights, a vertical bar may
appear in the picture. This is normal for the
CCD pick-up. Try to avoid this when possible.
appear in the picture. This is normal for the
CCD pick-up. Try to avoid this when possible.
• Using LCD monitor reduces battery operation
time. Return LCD monitor to locked position
when not in use.
when not in use.
• To hear sound while recording, connect
earphone (M3 type: not supplied) to PHONE
jack. Earphone volume cannot be changed
while in CAMERA mode.
jack. Earphone volume cannot be changed
while in CAMERA mode.
EVF or LCD Monitor
(Record/Pause mode)
EVF or LCD Monitor
(Record mode)
Tape speed
WARNING:
• Do not leave the camcorder with the EVF
aimed directly at the sun. This may cause
damage to the internal parts of the EVF.
damage to the internal parts of the EVF.
LCD-OPEN
BRIGHT
3
1
PHONE
(earphone)
jack
(earphone)
jack
4
SPEED
SP/SLP
POWER
POWER
REC
REC
REC
CAMERA
CAMERA
OFF
OFF
VCR
VCR
PHOTO
PHOTO
6
Power
Lamp
Lamp
2
5
VISION
ADJUSTMENT
ADJUSTMENT
3