Panasonic NV-GS400GN Benutzerhandbuch
Recording Mode
32
2
Press the [
;/∫] Button to select the
[MNL (AGC*, NO-AGC)].
≥AGC*: Auto Gain Control
≥When you set [MODE] to any other setting
≥AGC*: Auto Gain Control
≥When you set [MODE] to any other setting
than [AUTO], the Microphone Sensitivity
Level appears.
Level appears.
AUTO:
AGC is activated, and the recording level is
adjusted automatically.
adjusted automatically.
MNL (AGC):
The desired recording level can be set. AGC
will also be activated to reduce the amount of
distortion in the audio.
will also be activated to reduce the amount of
distortion in the audio.
MNL (NO-AGC):
AGC is not activated and so natural recording
can be performed. Adjust in such a way that
the sound will not be distorted at the maximum
volume level. When the Zoom Microphone
Function is set to [ON], adjust the recording
level after pushing the [W/T] Lever toward [T].
can be performed. Adjust in such a way that
the sound will not be distorted at the maximum
volume level. When the Zoom Microphone
Function is set to [ON], adjust the recording
level after pushing the [W/T] Lever toward [T].
3
Press the [
5] Button
(18)
or [
6] Button
(21)
to increase or decrease the bars of the
[GAIN] Indication.
≥Adjust the [GAIN] value so that the last three
≥Adjust the [GAIN] value so that the last three
Bars of the [LEVEL (MIC)] will not light red.
(Otherwise, the Sound is distorted.)
(Otherwise, the Sound is distorted.)
ª Bass Enhancer
It strengthens the lower area of the audio to
record more powerful audio.
record more powerful audio.
1
Set [TAPE RECORDING MENU] >>
[ADVANCED] >> [BASS ENHANCE] >>
[3dB] or [6dB].
[ADVANCED] >> [BASS ENHANCE] >>
[3dB] or [6dB].
To Cancel the Bass Enhancer Function
Set [TAPE RECORDING MENU] >>
[ADVANCED] >> [BASS ENHANCE] >> [0dB].
Set [TAPE RECORDING MENU] >>
[ADVANCED] >> [BASS ENHANCE] >> [0dB].
ª Colour Bar
This displays 7 colour bars which are useful for
adjusting the picture quality of the TV or external
monitor.
adjusting the picture quality of the TV or external
monitor.
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
!/MENU:EXIT
MIC LEVEL SETUP
(dB)-30 0 +6
|||||||||||---
GAIN
(dB)-30 0 +6
LEVEL
(MIC)
.............
MODE ޓޓAUTO
1MNL(AGC)
MNL(NO-AGC)
MNL(NO-AGC)
MENU
STILL
FADE
ENTER
(16)
1
Set [TAPE RECORDING MENU] >>
[ADVANCED] >> [COLOUR BAR] >> [ON].
[ADVANCED] >> [COLOUR BAR] >> [ON].
≥The colour bars are not recorded onto the card.
≥For other notes concerning this item, see
-58-
.
Using the Auto Pop-up Flash
The Auto Pop-up Flash enables you to record still
pictures in a dark place.
pictures in a dark place.
1
Repeatedly press the [
ß] Button
(8)
to
select a desired flash mode.
1) Auto: The Movie Camera perceives the
brightness around the subject and the
Auto Pop-up Flash is automatically
popped up and activated. (In bright
places, the indication disappears and
the Auto Pop-up Flash does not light.)
Auto Pop-up Flash is automatically
popped up and activated. (In bright
places, the indication disappears and
the Auto Pop-up Flash does not light.)
2) OFF: The Auto Pop-up Flash is not popped
up and activated.
3) ON:
The Auto Pop-up Flash is always
popped up and activated.
popped up and activated.
2
Press the [PHOTO SHOT] Button
(52)
halfway to pop up the Flash.
≥The Auto Pop-up Flash is not activated
depending on the setting on the flash and the
brightness around the subject.
brightness around the subject.
3
Press the [PHOTO SHOT] Button
(52)
fully
which is pressed halfway.
≥The flash lights and a still picture is recorded.
≥After recording, close the Auto Pop-up Flash
≥The flash lights and a still picture is recorded.
≥After recording, close the Auto Pop-up Flash
by pressing on it.
MENU
STILL
FADE
ENTER
(16)
(8)
1)
2)
3)
PHOTO
SHOT
(52)
400GN.book 32 ページ 2004年6月3日 木曜日 午後1時49分