Panasonic NV-GS400GN Benutzerhandbuch
Before Use
8
ª Using the Remote Controller
1
1
Direct the Remote Controller at the Remote
Control Sensor
Control Sensor
(36)
of the Movie Camera
and press an appropriate button.
≥Distance from the Movie Camera: Within
approximately 5 metres
≥Angle: Within approximately 10o in the
upward, and 15
o in the downward and
horizontal directions from the central axis
≥The above operating ranges are for indoor use.
Outdoors or under strong light, the Movie
Camera may not operate properly even within
the above ranges.
Camera may not operate properly even within
the above ranges.
≥Within a 1-metre range, you can also use the
Remote Controller on the LCD Monitor side of
the Movie Camera.
the Movie Camera.
Selecting Remote Controller Modes
When 2 Movie Cameras are used
simultaneously, they can be operated individually
by selecting different Remote Controller Modes.
≥If the Remote Controller Mode of the Movie
When 2 Movie Cameras are used
simultaneously, they can be operated individually
by selecting different Remote Controller Modes.
≥If the Remote Controller Mode of the Movie
Camera and that of the Remote Controller do
not match, [REMOTE] Indication is displayed.
not match, [REMOTE] Indication is displayed.
Setup on the Movie Camera:
Set [REMOTE] on the [INITIAL] Sub-Menu to the
desired Remote Controller Mode. (
Set [REMOTE] on the [INITIAL] Sub-Menu to the
desired Remote Controller Mode. (
-15-
)
Setup on the Remote Controller:
[VCR1]: Press the [
D] Button and [∫] Button
simultaneously.
1
[VCR2]: Press the [
E] Button and [∫] Button
simultaneously.
2
WARNING
Risk of fire, explosion and burns. Do not
recharge, disassemble, heat above 100
Risk of fire, explosion and burns. Do not
recharge, disassemble, heat above 100
xC or
incinerate. Keep the Button-Type battery out
of the reach of children. Never put
Button-Type battery in mouth. If swallowed
call your doctor.
of the reach of children. Never put
Button-Type battery in mouth. If swallowed
call your doctor.
10˚
15˚
15˚
15˚
(36)
INDEX
INDEX
SELECT
STOP
K
L
∫
STILL ADV
W
PAUSE STILL ADV
6
1
5
;
E
D
P.B. ZOOM
2
1
≥When the battery in the Remote Controller is
replaced, the mode is automatically reset to
[VCR1] Mode.
[VCR1] Mode.
Power Supply
ª Using the AC Adaptor
1
Connect the DC Input Lead to the Movie
Camera.
Camera.
2
Connect the DC Input Lead to the AC
Adaptor.
Adaptor.
3
Connect the AC Mains Lead to the AC
Adaptor and the AC mains socket.
≥The AC Mains Lead’s outlet plug does not fit
Adaptor and the AC mains socket.
≥The AC Mains Lead’s outlet plug does not fit
entirely into the AC Adaptor socket. A gap will
remain as shown
remain as shown
1.
≥Before connecting or disconnecting the
power supply, set the [OFF/ON] Switch on
the Movie Camera to [OFF] and make sure
that Power Lamp is not lit.
the Movie Camera to [OFF] and make sure
that Power Lamp is not lit.
ª Using the Battery
Before use, fully charge the Battery.
≥We recommend using Panasonic’s Battery.
≥We cannot guarantee the quality of this Movie
≥We recommend using Panasonic’s Battery.
≥We cannot guarantee the quality of this Movie
Camera when batteries of other companies are
used.
used.
1
Attach the Battery to the AC Adaptor and
charge it.
charge it.
≥Since the Battery will not be charged when
the DC Input Lead is connected to the AC
Adaptor, disconnect it from the AC Adaptor.
Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging
starts.
1
400GN.book 8 ページ ２００４年６月３日 木曜日 午後１時４９分