Samsung SCD903 Benutzerhandbuch

●

DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are included with your camcorder so that you may use

them more easily.

✤ The DEMONSTRATION function may only be used in the CAMERA mode without a tape inserted in the camcorder. 

✤ The demonstration operates repeatedly until the DEMONSTRATION mode is switched OFF.

1. Set the camcorder to CAMERA mode. 

(The mode switch must be in the TAPE position.)

2. Press the MENU button.

■

The menu list will appear.

3. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR.

4. Select DEMONSTRATION from the submenu and push the MENU SELECTOR.

5. To activate the DEMONSTRATION, set DEMONSTRATION ON.

■

Press the MENU button to quit the menu.

■

The demonstration will begin.

6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.

Notes

■

The DEMONSTRATION function only works without a TAPE installed.

■

The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after
switching to the CAMERA mode (no tape is inserted in the camcorder). 

■

If you press other buttons (FADE, BLC, PHOTO, EASY Q) during the DEMONSTRATION mode, the DEMONSTRATION
stops temporarily and resumes 10 minutes later if you do not operate any other functions.

CAM  MODE

INITIAL

CLOCK  SET
WL. REMOTE
BEEP SOUND
SHUT. SOUND
LANGUAGE
DEMO

CAMERA
A/V
MEMORY
VIEWER

CAM  MODE

INITIAL SET

CLOCK  SET
WL.REMOTE

LANGUAGE
DEMONSTRATION

BEEP SOUND
SHUTTER SOUND

ENGLISH

00792B SCD903 USA (28~63)  5/14/04 10:45 AM  Page 42