Sony BDP - S300 Benutzerhandbuch

Seite von 63
2
WARNING
To reduce the risk of fire or electric 
shock, do not expose this apparatus to 
rain or moisture.
To avoid electrical shock, do not open 
the cabinet. Refer servicing to qualified 
personnel only.
The mains lead must be changed only at 
a qualified service shop.
Batteries or batteries installed apparatus 
shall not be exposed to excessive heat 
such as sunshine, fire or the like.
CAUTION
The use of optical instruments with this 
product will increase eye hazard. As the 
laser beam used in this Blu-ray Disc 
player is harmful to eyes, do not attempt 
to disassemble the cabinet. 
Refer servicing to qualified personnel 
only.
This label is located on the laser 
protective housing inside the enclosure.
This appliance is classified as a 
CLASS 1 LASER product. The 
CLASS 1 LASER PRODUCT 
MARKING is located on the laser 
protective housing inside the enclosure.
Notice for customers in the United Kingdom 
and Republic of Ireland
A moulded plug complying with BS1363 is fitted to 
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be 
replaced, a fuse of the same rating as the supplied 
one and approved by ASTA or BSI to BS1362, (i.e., 
marked with 
 or 
 mark) must be used.
If the plug supplied with this equipment has a 
detachable fuse cover, be sure to attach the fuse 
cover after you change the fuse. Never use the plug 
without the fuse cover. If you should lose the fuse 
cover, please contact your nearest Sony service 
station.
Disposal of Old Electrical & Electronic Equipment 
(Applicable in the European Union and other 
European countries with separate collection 
systems)
This symbol on the product or on its packaging 
indicates that this product shall not be treated as 
household waste. Instead it shall be handed over to 
the applicable collection point for the recycling of 
electrical and electronic equipment. By ensuring this 
product is disposed of correctly, you will help 
prevent potential negative consequences for the 
environment and human health, which could 
otherwise be caused by inappropriate waste handling 
of this product. The recycling of materials will help 
to conserve natural resources. For more detailed 
information about recycling of this product, please 
contact your local Civic Office, your household 
waste disposal service or the shop where you 
purchased the product.
The manufacturer of this product is Sony 
Corporation, 1-7-1 Konan Minato-ku 
Tokyo, 108-0075 Japan. The Authorized 
Representative for EMC and product 
safety is Sony Deutschland GmbH, 
Hedelfinger Strasse 61, 70327 Stuttgart, 
Germany. For any service or guarantee 
matters please refer to the addresses 
given in separate service or guarantee 
documents.
Precautions
Safety
• This unit operates on 220 – 240 V AC, 
50/60 Hz. Check that the unit’s 
operating voltage is identical with your 
local power supply.
• To prevent fire or shock hazard, do not 
place objects filled with liquids, such 
as vases, on the apparatus.
Installing
• Do not install the unit in an inclined 
position. It is designed to be operated 
in a horizontal position only.
• Keep the unit and discs away from 
equipment with strong magnet, such as 
microwave ovens, or large 
loudspeakers.
• Do not place heavy objects on the unit.
• Do not install this unit in a confined 
space, such as a bookshelf or similar 
unit.
• Install this system so that the mains 
lead can be unplugged from the wall 
socket immediately in the event of 
trouble.
Notes About the 
Discs
• To keep the disc clean, handle the disc 
by its edge. Do not touch the surface.
• Do not expose the disc to direct 
sunlight or heat sources such as hot air 
ducts, or leave it in a car parked in 
direct sunlight as the temperature may 
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. 
Wipe the disc from the centre out.
• Do not use solvents such as benzine, 
thinner, commercially available disc/
lens cleaners, or anti-static spray 
intended for vinyl LPs.
• If you have printed the disc’s label, dry 
the label before playing.