Honeywell LYNXR-2 Benutzerhandbuch

 

Pressing STATUS key once will announce the following primary messages, depending on 
the system’s status at the time: 
Disarmed–Ready to Arm [check system] 
Disarmed [not ready to arm] 
Armed [away] [stay] [instant] [check system] [exit now] 
 
Pressing the STATUS key twice will announce the following secondary messages, depending 
on the system’s status at the time: 
Fire Alarm + zone voice descriptor 
Alarm + zone voice descriptor 
Carbon Monoxide Alarm + zone voice descriptor 
Carbon Monoxide Fault + zone voice descriptor 
Fire Fault + zone voice descriptor 
Fault + zone voice descriptor Alarm + zone voice descriptor 
Low Battery + zone voice descriptor Fire Fault + zone voice descriptor 
System Low Battery 
Check System 
AC Loss 
Zones Bypassed 
Chime 

NOTE: If there are no secondary messages, the primary status messages will be announced. 

 

ARMED LED:  ON = System armed 
(Red) 

OFF = System disarmed 

 

Blinking = System armed, but a fault exists or once per second when AVM (VOX or 
Talk) or speaker phone mode is active. 

 
READY LED:  ON = System disarmed, ready to arm 
(Green) 

Blinking = System disarmed, not ready to arm (a fault exists) or once per second when 
AVM (VOX or Talk) or speakerphone mode is active. 

 
NOTE: When the system is armed, the READY LED turns off.