Samsung HT-H5200 Benutzerhandbuch

 - English

Settings

6.  Repeat Steps 4 and 5 until you have filled in all 

parameters.

 

✎

You can get the network parameter values 
from your Internet provider.

7.  When finished entering all the parameter 

values, select Return ('), and then press the 
v button. The home cinema verifies the 

network connection and then connects to the 
network.

You can set up a wireless network connection in 
three ways:

 

- Wireless Automatic

 

- Wireless Manual

 

- WPS(PBC)
Before you configure the wireless network 
connection, disconnect any wireless network devices 
currently connected to the product or, if applicable, 
the product's current wired connection.

 

Ğ

Follow the Steps 1 to 3 in "Configuring Your 
Network Connection". (See page 17)
1.  In the Network Settings screen, change 

Network Type to Wireless. The product searches 

for and then displays a list of the available 
networks.

Network Settings

Select your network type.

Network Type 

Wireless

Wireless network

m Move      " Select      ' Return

You can connect your BD  
Home Theater to the  
internet. Please select which wireless 
network to use.

WPS(PBC)

Search

si-ap

MIC

KIMING_VTOWER

2.  Select the desired network, and then press the 

v button.

3.  On the Security screen, enter your network's 

security code or pass phrase. 
Enter numbers directly using the number 
buttons on your remote control. Enter letters 
by selecting a letter with ▲▼◀▶ buttons, and 
then pressing v button.

4.  When finished, select Done, and then press the 

v button. The product verifies the network 

connection and then connects to the network.

 

✎

You should be able to find the security code or 
pass phrase on one of the set up screens you 
used to set up your router or modem.

 

Ğ

If you have a static IP address or the Automatic 
procedure does not work, you'll need to set the 
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your 
Network Connection". (See page 17)
1.  In the Network Settings screen, change 

Network Type to Wireless. The product searches 

for and then displays a list of the available 
networks.

2.  Scroll through the list, select the desired 

network or Add Network, and then press the 
v button.

3.  If you selected a network in Step 2, go to Step 6.  

If you selected Add Network, go to Step 4.

4.  Enter your wireless network or wireless router's 

name.

 

 

Enter letters by selecting a letter with the 
▲▼◀▶ buttons, and then pressing the v 
button.

 

To display capital letters (or redisplay lower 
case letters if capital letters are displayed), 
select 

, and then press the v button.

 

To display symbols and punctuation, select 
123#&, and then press the v button. To 

redisplay letters, select 123#&, and then 

press the v button.

When finished, select Done, and then press the 
v button. 

5.  On the Security method screen that appears, 

use the ▲▼ buttons to select the network's 
Security method, and then press the v 

button. On the next screen, enter your 
network's security code or pass phrase.

 

Enter numbers directly using the number 
buttons on your remote control.

 

Enter letters by selecting a letter with the 
▲▼◀▶ buttons, and then pressing the v 
button.