Runco SC-35d Benutzerhandbuch

Other considerations and tips that can help improve your installation:

• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector 

away from heating and/or air conditioning vents. Changes in temperature may cause 
drifts in the projector circuitry, which may affect performance.

• Keep the projector away from devices that radiate electromagnetic energy such as 

motors and transformers. Common sources of these include slide projectors, 
speakers, power amplifiers and elevators.

The primary projection lens is shipped separately from the projector. Tto install it, proceed 
as follows: 

1.

Carefully remove the projector from the 
shipping container and place it on a flat 
surface. 

2.

Loosen the Phillips screws at the bottom 
and top of the decorative bezel on the front 
of the projector.

3.

Grasp the bezel by the front, then slide it 
forward to remove it.

4.

Carefully remove the lens from the shipping container. 

5.

Remove the rear cap from the lens. This protective cap is only used during shipping to 
protect the lens from damage. 

➤