Sony LF-B1 Benutzerhandbuch

40

To connect to the Base Station via your router at 
home and to use NetAV when you are away from 
home, port forwarding needs to be set on the 
router. 
When your router is compatible with UPnP 
(Universal Plug and Play), you can use UPnP to 
configure port forwarding on the router 
dynamically.

z 

For details about router settings, refer to the operating 
instructions for your router.

1

Select whether to enable or disable automatic 
router configuration (UPnP).
When [Disable UPnP] is set, port forwarding 
needs to be set on the router. 
At the time of purchase, this is set to [Enable 
UPnP].

2

Click this and save changes.

To use the NetAV function to watch video away 
from home, you need to use the Dynamic DNS 
service. If you want to use your Dynamic DNS 
service, refer to the following description to 
configure the settings. You do not need to 
configure the following settings if you performed 
the [Easy Setup]. 

The [Dynamic DNS Settings] frame appears 
when you click [Dynamic DNS Settings].

1

A domain name appears here if you have used 
the [Easy Setup] to register with the preset 
Dynamic DNS service.

2

The current status of the Dynamic DNS 
settings appears here. “Success” appears if the 
service works correctly.

3

Click this if you want to change the Dynamic 
DNS settings manually.

z 

If [Easy Setup] has already been performed, the 
current Dynamic DNS setting status appears in 
[Current Status]. If the Dynamic DNS is set manually 
after performing [Easy Setup], the Dynamic DNS 
registered by [Easy Setup] is cancelled.