Sony LF-B1 Benutzerhandbuch

5

1 WIRELESS LED

Indicates the wireless function status.
Green: Connected with the LocationFree device on the 2.4 GHz 

channel.

Turns green momentarily, then turns off for 3 seconds: Wireless is 

enabled, but wireless communication with a LocationFree 
device is not taking place. 

2 NETWORK LED

Indicates the connection status to an external network, such as the 
Internet.
Green slow blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when 

data is transmitted. 

Off: Not connected.

3 NETAV LED

Indicates the connection status with the LocationFree device.
Green fast blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green: Connected with NetAV.
Amber blinking: Updating Dynamic DNS. 
Amber: Dynamic DNS failure. 
Off: Not connected.
Red: The Base Station is being initialized. 

4 SETUP MODE LED (

Amber: The Base Station is in Setup mode.
Amber blinking: Easy registration is possible.

5 POWER LED (

Green: The power is on.
Red blinking: A malfunction has occurred.

6 POWER button (

Turns the Base Station power on and off.

7 LAN port 

Connect a LAN cable.

8 BASE STATION RESET button (

Initializes all settings on the Base Station to the factory defaults.

9 SETUP MODE button (

Press to register LocationFree devices, or to make Base Station 
settings.

0 IN 2 (AUDIO/VIDEO) terminal (

Connect the scart to A/V cable (supplied) or the A/V cable (RCA 
pin cable, supplied).

qa DC IN jack (

Connect the AC power adapter (supplied).

qs IN 1 (AUDIO/VIDEO) terminal (

Connect the scart to A/V cable (supplied) or the A/V cable (RCA 
pin cable, supplied).

qd IR BLASTER port (

Connect the IR Blaster (supplied).

1

2

3

5

4

6