Hoover WindTunnel vacuum cleaner Benutzerhandbuch
3
STEP 1 Attach rack and handle
Carton contents
Remove all parts from carton and identify each item
shown. Make sure all parts are located before disposing
of packing.
shown. Make sure all parts are located before disposing
of packing.
A. Handle section
B. Cleaner body
C. Hose rack
D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
B. Cleaner body
C. Hose rack
D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
(in bag with owner’s manual)
A
A
B
C
D
E
This cleaner was inspected and packaged carefully before being shipped from the factory.
If you should happen to need assistance during assembly or operation,
If you should happen to need assistance during assembly or operation,
Visit us online at
www.hoover.com
to find the service outlet nearest you (click on
the “Service” button) OR
Call
Call
1-800-944-9200
for an automated referral of authorized service outlet locations (U.S. only)
OR
Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.
Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.
Continued ➜
1. Assembling cleaner
Not
Note:
The
white switch lock
above the ON/OFF
switch aids in the
assembly
of your cleaner. Assembly
can be continued if the switch lock is missing.
However,
However,
do not remove
the switch lock
until
assembly is completed.
Open tool cover on handle section
(A).
(A).
1-2
Attach
hose rack
to
handle section
by
fitting hooks
(B)
on rack over
slots
(C)
on handle section.
Align hole on rack with circular tab
on handle.
on handle.
C
B
1-4
1-3
1-1