Honeywell RTH4300B Benutzerhandbuch
RTH4300B Programmable Thermostat
3
If labels do not match letters on the thermo-
stat, check the chart at right and connect to
terminal as shown here (see notes, below).
stat, check the chart at right and connect to
terminal as shown here (see notes, below).
If wires will be connected to both
R and Rc terminals, remove metal
jumper (see page 12).
R and Rc terminals, remove metal
jumper (see page 12).
Do not use C, X, or B. Wrap bare
end of wire with electrical tape.
end of wire with electrical tape.
Do not connect both O and B
if you have a heat pump. Connect
O wire to O. Wrap B wire with
electrical tape and do not use.
if you have a heat pump. Connect
O wire to O. Wrap B wire with
electrical tape and do not use.
Connect wires (less common wire designations)