Honeywell L4006H Benutzerhandbuch
L4006A,B,E,H AQUASTAT® CONTROLLERS
5
60-0915—4
MATERIAL SAFETY DATA SHEET
Section 1. Product And Company
Identification
Identification
Product Name: Heat Conductive Compound
MSDS ID: DS9021
Synonyms: MS1699
Product Use: Heat conductive material used to enhance
contact and heat transfer in temperature sensor
contact and heat transfer in temperature sensor
applications.
Manufacturer: Honeywell Inc., 1985 Douglas Drive North,
Minneapolis, MN 55422.
Minneapolis, MN 55422.
Date Released: October 8, 1999
Customer Response Center: 800-328-5111
Emergency Telephone Information: 888-809-3787
NFPA Ratings:
Health 0; Flammability 1; Reactivity 0; Personal Pro-
tection B
tection B
Section 2. Composition, Information on
Ingredients
Ingredients
Additional Information: Part No. 120650 (0.5 oz tube); Part No. 107408 (4 oz can); Part No. 197007 (5 gallon
container). May also contain minute amounts of lithium and molybdenum lubricant compounds.
Section 3. Hazard Identification
Acute Health Effects:
Skin: Excessive contact may cause skin irritation and
dermatitis.
dermatitis.
Eye: Direct contact with eye will cause irritation.
Inhalation: No adverse effects are expected.
Ingestion: Ingestion of product may cause nausea,
vomiting and diarrhea.
Chronic Health Effects:
Existing skin rash or dermatitis may be aggravated by
repeated contact.
repeated contact.
OSHA Hazard Classifications: None.
Carcinogenicity: Not considered to be a carcinogen by
either OSHA, NTP, IARC, or ACGIH.
Section 4. First Aid Measures
Eye Contact: Flush eyes with water for 15 minutes.
Remove any contact lenses and continue to flush.
Remove any contact lenses and continue to flush.
Obtain medical attention if irritation develops and
persists.
persists.
Skin Contact: Remove excess with cloth or paper.
Wash thoroughly with mild soap and water. Obtain
medical attention if irritation develops and persists.
medical attention if irritation develops and persists.
Ingestion: Contact physician or local poison control
center immediately.
Inhalation: Remove patient to fresh air and obtain
medical attention if symptoms develop.
medical attention if symptoms develop.
Section 5. Fire Fighting Measures
Material Flash Point: > 383°F (195°C). Will burn if
exposed to flame.
Extinguishing Media: Carbon dioxide, dry chemical or
foam.
foam.
Special Fire Fighting Procedures: None.
Explosion Hazards: None. Aluminum powder can
react with water to release flammable hydrogen gas.
In the form of this product, this reaction is not
In the form of this product, this reaction is not
expected.
Section 6. Accidental Release Measures
Scrape up and dispose of as solid waste in
accordance with state and federal regulations.
accordance with state and federal regulations.
Ingredient
CAS Number
Percent
PEL
TVL
#2 Lithium Complex Grease (70%):
Mineral Oil
Mineral Oil
64742-65-0
35-50
5 mg/m
3
5 mg/m
3
Mineral Oil
64742-62-7
20-25
5 mg/m
3
5 mg/m
3
Lithium Hydrostearate/Sebacate
Complex
68815-49-6
4-9
—
—
Zinc Alkyldithiophosphate
68649-42-3
0-2
—
—
Aluminum Paste (30%):
Aluminum, as Al
Aluminum, as Al
7429-90-5
20-25
15 mg/m
3
10 mg/m
3
Aliphatic Petroleum Distillates
8052-41-3
10-15
2900 mg/m
3
525 mg/m
3
Stearic Acid
57-11-4
1-2
—
—
Aromatic Petroleum Distillates
64742-95-6
1-2
5 mg/m
3
5 mg/m
3