Honeywell TH3110D Benutzerhandbuch
Installation Guide
10
Inside
Set To
75
75
Heat On
Cool On
°
°
Replace Batt
Quick reference to display screen
Current inside temperature
Low battery warning
Temperature setting
System status
On when “calling” for
heating or cooling;
flashes when waiting for
compressor restart
On when “calling” for
heating or cooling;
flashes when waiting for
compressor restart
Quick reference to controls
Digital display screen
Temperature buttons
Press to adjust temperature
settings
Press to adjust temperature
settings
System switch
•
Cool: Thermostat controls only
the cooling system.
the cooling system.
•
Heat: Thermostat controls only
the heating system.
the heating system.
•
Off: Heating and cooling
systems are off.
systems are off.
Fan switch
On: Fan runs continuously.
Auto: Fan runs only when heating
or cooling system is on.
On: Fan runs continuously.
Auto: Fan runs only when heating
or cooling system is on.
Inside
Set To
75
75
Cool On
°
°
Built-in compressor protection (Setup Function 15)
This feature helps prevent damage to the
compressor in the air conditioning or heat
pump system.
compressor in the air conditioning or heat
pump system.
Damage can occur if the compressor is re-
started too soon after shutdown.This feature
forces the compressor to wait for a few min-
utes before restarting.
started too soon after shutdown.This feature
forces the compressor to wait for a few min-
utes before restarting.
During the wait time, the message Cool On
(or Heat On if you have a heat pump) will
flash on the display.When the safe wait time
has elapsed, the message stops flashing and
the compressor turns on.
(or Heat On if you have a heat pump) will
flash on the display.When the safe wait time
has elapsed, the message stops flashing and
the compressor turns on.
Message flashes until safe
restart time has elapsed
restart time has elapsed