Emerson Rosemount 2230 Benutzerhandbuch

300560EN, Rev AA
May 2011

3-3

Rosemount 2230

Section 3. Installation

The Rosemount 2230 Graphical Field Display is designed for mounting on a 
plate, wall, or pipe.

The 2230 display can be mounted on a plate by attaching four M4 screws to 
the back of the display. To mount the 2230:

1. Drill four holes in the plate according to the hole pattern on the back of 

the 2230 display as illustrated in Figure 3-2.

2. Mount the 2230 on the plate using four M4 screws. Note that the M4 

screws that are shipped with the 2230 display can be used as long as the 
plate thickness does not exceed 5 mm (0.2 in.).

Figure 3-2. Mounting hole 

pattern