Sony DVP-F25 Handbuch

Playing Discs

Depending on the DVD or VIDEO CD, some
operations may be different or restricted.

Refer to the operating instructions supplied
with your disc.

Turn on your TV.

Press [/1.

The player turns on and the power
indicator lights up in green.

Switch the input selector on your

TV so that the signal from the

player appears on the TV screen.

◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.

Insert a disc in the player.

Press H.

The player starts playback (continuous
play). Adjust the volume on the TV or the
amplifier (receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 33.

To turn off the player

Press [/1. The player enters standby mode.

Hint

You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 61).

Notes on playing DTS sound tracks on a CD

• When playing DTS-encoded CDs,

excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.

• Set the sound to “STEREO” using the

AUDIO button when you play DTS sound
tracks on a CD (page 45).

• Do not play DTS sound tracks without first

connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL) jack even if
“DTS” in “AUDIO SETUP” is set to “OFF”
in the Setup Display (page 63), and may

(power) button/

indicator

The labeled (or non-playback) side
appears through the disc window.