Sony CDX-GT30RN Benutzerhandbuch

Seite von 100
18
Error displays/Messages
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t Tuning stops too frequently: 
Press (SENS) until “LOCAL-ON” appears.
t Tuning does not stop at a station: 
Press (SENS) repeatedly until “MONO-ON” or 
“MONO-OFF” (FM), or “LOCAL-OFF” (MW/
LW) appears.
• The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “ST” indication 
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Press (SENS) to set the monaural reception 
mode to “MONO-ON.”
An FM programme broadcast in stereo is heard 
in monaural.
The unit is in monaural reception mode.
t Press (SENS) until “MONO-OFF” appears.
RDS
The SEEK starts after a few seconds of 
listening.
The station is non-TP or has weak signal.
t Deactivate TA (page 9).
No traffic announcements.
• Activate TA (page 9).
• The station does not broadcast any traffic 
announcements despite being TP.
t Tune in another station.
PTY displays “- - - - - - - -.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme type.
BLANK*
1
Tracks have not been recorded on the MD.
*
2
t Play an MD with recorded tracks.
ERROR*
1
• The disc is dirty or inserted upside down.
*
2
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play because of some problem.
t Insert another disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to 
check the connection.
LOAD
The changer is loading the disc.
t Wait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current 
station.
t Press (SEEK) –/+ while the programme service 
name is flashing. The unit starts searching for 
another frequency with the same PI (Programme 
Identification) data (“PI SEEK” appears).
NO DISC
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO ID3
ID3 tag information is not written in the MP3 file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus or WMA file.
NO MAG
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
NO MUSIC
The disc is not a music file.
t Insert a music CD in this unit or MP3 playable 
changer.
NO NAME
A track/album/group/disc name is not written in the 
track.
NO TP
The unit will continue searching for available TP 
stations.
NOT READ
The disc information has not been read by the unit.
t Load the disc, then select it on the list.
NOTREADY
The lid of the MD changer is open or the MDs are not 
inserted properly.
t Close the lid or insert the MDs properly.