Sony CDX-GT31MP Benutzerhandbuch

12

Press and hold the select button.
The setup display appears.

*

* For CLOCK-ADJ, TUNER-STP and BTM 

settings, step 4 is not necessary.

The following items can be set depending 
on the source and setting:

*1 This feature is available on non-Argentine 

models.

*2 When the unit is turned off.

*3 When the audio output is set to “SUB-OUT.”

CLOCK-ADJ (Clock Adjust) (page 4)

TUNER-STP*

1

 (Tuner Step) (page 4)

CT (Clock Time)

Activates the CT function: “ON,” “OFF” 
(page 9).

Activates the beep sound: “ON,” “OFF.”

CAUT ALM*

2

 (Caution Alarm)

Activates the caution alarm: “ON,” 
“OFF” (page 5).

AUX-A*

2

 (AUX Audio)

Activates the AUX source display: “ON,” 
“OFF” (page 13).

Shuts off automatically after a desired 
time when the unit is turned off: “NO,” 
“30S (Seconds),” “30M (Minutes),” “60M 
(Minutes).”

REAR/SUB*

2

Switches the audio output: “REAR-
OUT” (power amplifier), “SUB-OUT” 
(subwoofer).

BLK OUT (Black Out)

Turns off the illumination automatically 
for any source (e.g., during radio 
reception/CD playback, etc.) if no 
operation is performed for 5 seconds: 
“ON,” “OFF.”
To bring the light back on, press any 
button on the unit. (When activated, 
remote operation is unavailable.)

DEMO (Demonstration)

Activates the demonstration: “ON,” 
“OFF.”

Changes the display brightness: “ON,” 
“OFF.”

M.DISPLAY (Motion Display)

– “ON”: to show moving patterns.
– “OFF”: to deactivate the Motion Display.

AUTO SCR (Auto Scroll)

Scrolls long items automatically: “ON,” 
“OFF.”

LPF*

3

 (Low Pass Filter)

Selects the subwoofer cut-off frequency: 
“OFF,” “80Hz,” “100Hz,” “120Hz,” 
“140Hz,” “160Hz.”

SW PHASE*

3

 (Subwoofer Phase)

Selects the subwoofer phase: “SUB 
NORM,” “SUB REV.”

HPF (High Pass Filter)

Selects the front/rear speaker cut-off 
frequency: “OFF,” “80Hz,” “100Hz,” 
“120Hz,” “140Hz,” “160Hz.”

Reinforces bass and treble for clear 
sound at low volume levels: “ON,” 
“OFF.”

BTM (page 8)