Sony CDX-52RF Benutzerhandbuch
6
EN
Actual total number:
Sony CDX-52RF (E, S, C) 3-856-013-32 (1)
CD Changer
Listening to a CD
1
Turn on the FM tuner of the car audio.
2
Adjust the selected transmitting
frequency with the wired remote.
(88.3 MHz/88.5 MHz/88.7 MHz/88.9 MHz/
89.1 MHz/89.3 MHz/89.5 MHz/89.7 MHz/
89.9 MHz)
frequency with the wired remote.
(88.3 MHz/88.5 MHz/88.7 MHz/88.9 MHz/
89.1 MHz/89.3 MHz/89.5 MHz/89.7 MHz/
89.9 MHz)
3
Press ^.
CD playback starts.
CD playback starts.
When the unit is used in a car without an
accessory position on the ignition key switch
Be sure to press (OFF) on the wireless remote to turn the
system off to avoid battery wear while the engine is not
running.
accessory position on the ignition key switch
Be sure to press (OFF) on the wireless remote to turn the
system off to avoid battery wear while the engine is not
running.
If the POWER SELECT switch on the hideaway unit is set
to the OFF position and the display on the wired remote is
turned off, you will not be able to start CD playback with
the wireless remote. In this case, press ^ on the wired
remote .
to the OFF position and the display on the wired remote is
turned off, you will not be able to start CD playback with
the wireless remote. In this case, press ^ on the wired
remote .
4
Adjust the volume with the volume
control on the car audio.
All the tracks play from the beginning.
control on the car audio.
All the tracks play from the beginning.
Locating a specific track
— Automatic Music Sensor (AMS)
— Automatic Music Sensor (AMS)
During playback, press either side of
(AMS) once for each track you wish to
skip.
(AMS) once for each track you wish to
skip.
Locating a specific point in a track
— Manual Search
— Manual Search
During playback, press and hold
(DISC+)or (DISC–). Release the button
when you have found the desired part.
(DISC+)or (DISC–). Release the button
when you have found the desired part.
DISC
To locate succeeding discs
DISC
To locate previous discs
AMS
To locate
succeeding tracks
succeeding tracks
To locate
previous tracks
previous tracks
To search forward
To search backward
DISC
DISC
Locating a specific disc
— Disc Select
— Disc Select
During playback, press (DISC+) or
(DISC–) once for each disc you wish to
skip.
(DISC–) once for each disc you wish to
skip.
Stopping CD play
Press (OFF).
Notes
•
When CD playback is stopped, you may hear some noise
from the speakers. To prevent this from happening, turn
the volume down before stopping CD playback.
the volume down before stopping CD playback.
•
If you turn off the ignition switch of your car without
stopping CD playback, it will automatically resume CD
playback from where it was stopped the next time you
turn on the ignition switch.
playback from where it was stopped the next time you
turn on the ignition switch.
Listening to the radio or a tape
Be sure to stop CD playback before you start
listening to the radio or a tape.
listening to the radio or a tape.
Note
Be sure to stop CD playback, otherwise there may be some
interference with radio reception.
Be sure to stop CD playback, otherwise there may be some
interference with radio reception.
Playing tracks in random
order
order
— Shuffle Play
You can select:
• SHUF 1 to play the tracks on the current disc
• SHUF 1 to play the tracks on the current disc
in a random order.
• SHUF 2 to play all the discs in a random
order.
Press (SHUFFLE) or (SHUF) repeatedly
until the desired setting appears (SHUF 1
or SHUF 2).
until the desired setting appears (SHUF 1
or SHUF 2).
n
SHUF 1 n SHUF 2 n Cancel (SHUF off)
Shuffle play starts.
To go back to the normal playback mode, press
(SHUF) until “SHUF” disappears.
(SHUF) until “SHUF” disappears.