Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. CDX-R3350EE
  5. Benutzerhandbuch

Sony CDX-R3350EE Benutzerhandbuch

Download
Seite von 32
14
Power requirements: 12 V DC car battery 
(negative earth)
Dimensions: Approx. 178 
× 50 × 179 mm (w/h/d)
Mounting dimensions: Approx. 182 
× 53 × 161 mm 
(w/h/d)
Mass: Approx. 1.2 kg
Supplied accessories: 
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Optional accessory:
Rotary commander RM-X4S (CDX-R3350EE 
only)
Design and specifications are subject to change 
without notice.
• Lead-free solder is used for soldering certain parts. 
(more than 80 %)
• Halogenated flame retardants are not used in the 
certain printed wiring boards.
• Halogenated flame retardants are not used in 
cabinets.
• VOC (Volatile Organic Compound)-free vegetable oil 
based ink is used for printing the carton.
• Packaging cushions do not use polystyrene foam.
Troubleshooting
The following checklist will help you remedy 
problems you may encounter with your unit.
Before going through the checklist below, check 
the connection and operating procedures.
General
No power is being supplied to the unit.
• Check the connection. If everything is in order, 
check the fuse.
• If the unit is turned off and the display 
disappears, it cannot be operated with the 
remote commander. 
t Turn on the unit.
The power aerial does not extend.
The power aerial does not have a relay box.
No sound.
• The volume is too low.
• The ATT function is activated, or the Telephone 
ATT function (when the interface cable of a car 
telephone is connected to the ATT lead) is 
activated.
• The position of the fader control (FAD) is not 
set for a 2-speaker system.
US and foreign patents licensed from Dolby 
Laboratories.
MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.
No beep sound.
• The beep sound is cancelled (page 9).
• An optional power amplifier is connected and 
you are not using the built-in amplifier.
The contents of the memory have been 
erased.
• The RESET button has been pressed.
t Store again into the memory.
• The power connecting lead or battery has been 
disconnected.
• The power connecting lead is not connected 
properly.
Stored stations and correct time are erased.
The fuse has blown.
Makes noise when the position of the 
ignition key is switched.
The leads are not matched correctly with the 
car’s accessory power connector.
The display disappears from/does not 
appear in the display window.
• The dimmer is set “DIM-ON” (page 9).
• The display disappears if you press and hold 
(OFF).
t Press and hold (OFF) again until the 
display appears.
• The connectors are dirty (page 13).
CD playback
The disc is automatically ejected.
The disc has trouble.
t Check the following:
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside 
down or in the wrong way.
The disc does not playback.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use 
MP3 files cannot be played back.
The disc is not corresponding to the MP3 format 
and version (page 11).
MP3 files take longer to play back than 
others.
The following discs take a longer time to start 
playback.
– a disc recorded with a complicated tree 
structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
The ATRAC CD cannot play.
• The disc is not created by authorized software, 
such as SonicStage or SonicStage Simple 
Burner.
• Tracks that are not included in the group cannot 
be played.