Sony XR-CA630X Benutzerhandbuch
20
Adjusting the equalizer curve
1
Press
(MENU)
.
2
Press either side of
(DISC/PRESET)
repeatedly until “EQ7 TUNE” appears,
then press
then press
(ENTER)
.
3
Press either side of
(SEEK)
to select
the desired equalizer curve, then
press
press
(ENTER)
.
Each time you press (SEEK), the item
changes.
changes.
4
Select the desired frequency and level.
1
Press either side of
(SEEK)
to select
the desired frequency.
Each time you press (SEEK), the
frequency changes.
frequency changes.
62 Hz
y
157 Hz
y
396 Hz
y
1kHz
y
2.5kHz
y
6.3kHz
y
16kHz
2
Press either side of
(DISC/PRESET)
to adjust the desired volume level.
The volume level is adjustable in 1 dB
steps from –10 dB to +10 dB.
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
press (ENTER) for 2 seconds.
5
Press
(MENU)
twice.
When the effect setting is complete, the
normal playback mode appears.
normal playback mode appears.
CD/MD Unit (optional)
This unit can control external CD/MD units
(optional).
If you connect an optional CD unit with the CD
TEXT function and the CUSTOM FILE
function, the CD TEXT information will appear
in the display when you play a CD TEXT disc.
(optional).
If you connect an optional CD unit with the CD
TEXT function and the CUSTOM FILE
function, the CD TEXT information will appear
in the display when you play a CD TEXT disc.
If you connect MP3 playable CD units (eg. MP3
CD changer), you can play MP3 files;
compressed audio files with quality sound. See
“MP3 playable CD Unit (optional)” on page 23.
CD changer), you can play MP3 files;
compressed audio files with quality sound. See
“MP3 playable CD Unit (optional)” on page 23.
Playing a CD or MD
1
Press
(SOURCE)
repeatedly to select
“CD” or “MD (MS
*
).”
2
Press
(MODE)
repeatedly until the
desired unit appears.
Playback starts.
*
MS: MG Memory Stick System-up Player MGS-X1
Cautions when connecting MGS-X1 and MD
unit(s).
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press
unit(s).
This unit recognizes MGS-X1 as an MD unit.
• When you want to play MGS-X1, press
(SOURCE)
to
select “MS” or “MD.” If “MS” appears in the source
display, MGS-X1 starts to play. If “MD” appears in
the source display, press
display, MGS-X1 starts to play. If “MD” appears in
the source display, press
(MODE)
to select “MS,” to
start playback.
• When you want to play an MD unit, press
(SOURCE)
to select “MD” or “MS.” If your desired MD unit
appears in the source display, it starts to play. If “MS”
or another MD unit appears in the source display,
press
appears in the source display, it starts to play. If “MS”
or another MD unit appears in the source display,
press
(MODE)
to select your desired MD unit, to
start playback.
To
Press
Skip discs
– Disc selection
– Disc selection
(DISC/PRESET) (+/–)