Sony 3-289-204-12(1) Benutzerhandbuch

Seite von 140
101
US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\090OTH.fm
masterpage: Right
STR-DA2400ES
3-289-204-12(1)
Oth
e
r Op
eratio
ns
About the indicators on the display window
Name
Function
A SW
Lights up when subwoofer 
is connected and the audio 
signal is output from the 
SUBWOOFER jack. While 
this indicator lights up, the 
receiver creates a 
subwoofer signal based on 
the LFE signal in the disc 
being played back or the 
low frequency components 
of the front channels.
B LFE
Lights up when the disc 
being played back contains 
an LFE (Low Frequency 
Effects) channel and the 
LFE channel signal is 
actually being reproduced. 
Since the LFE signal is not 
recorded in all parts of the 
input signal the bar 
indication will fluctuate 
(and may turn off) during 
playback.
C COAX
Lights up when INPUT 
MODE is set to “AUTO” 
and the source signal is a 
digital signal being input 
through the COAXIAL 
jack.
D OPT
Lights up when INPUT 
MODE is set to “AUTO” 
and the source signal is a 
digital signal being input 
through the OPTICAL jack.
E ; D/
; D EX/
; D+/
; TrueHD
“; D” lights up when the 
receiver is decoding Dolby 
Digital signals.
“; D EX” lights up when 
the receiver is decoding 
Dolby Digital Surround EX 
signals.
“; D+” lights up when the 
receiver is decoding Dolby 
Digital Plus signals.
“; TrueHD” lights up 
when the receiver is 
decoding Dolby TrueHD 
signals.
Note
When playing a Dolby Digital 
format disc, be sure that you 
have made digital connections 
and that INPUT MODE is set 
to “AUTO” (page 97).
F Neural-THX Lights up when the receiver 
applies Neural-THX 
processing to input signals.
Name
Function
continued