Sony 3-289-204-12(1) Benutzerhandbuch

US

D:\SONY HA\3289204121\01US-STRDA2400ESUC\110ADD.fm

STR-DA2400ES
3-289-204-12(1)

• Check that the DVD, etc. you are playing 

is recorded in Dolby Digital or DTS 
format.

• When connecting the DVD player, etc., to 

the digital input jacks of this receiver, 
make sure the setting for the digital audio 
output of the connected component is 
available.

• Check that the components are connected 

correctly (page 19).

• Select the source component using INPUT 

SELECTOR (page 50).

• Check that the playback component is 

connected on a digital jack and the input is 
selected properly on this receiver.

• Check whether the input source of the 

software being played back corresponds to 
the multi channel format.

• Check whether the setup on the playback 

component is set to multi channel sound.

• Check to make sure the selected audio 

(digital) input jack is not assigned to other 
inputs in “Input Assign” in the Input menu 
(page 98).

• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter 

and/or component is not connected 
correctly. Turn off the receiver, then 
reconnect the DIGITAL MEDIA PORT 
adapter and/or component.

• Check the DIGITAL MEDIA PORT 

adapter and/or component device to make 
sure it supports this receiver.

• Select the appropriate input on the receiver 

• Set your TV to the appropriate input mode.
• Move your TV away from the audio 

components.

• Assign the component video input 

correctly.

• The input signal should be same as the 

input function when you are up-converting 
an input signal with this receiver 
(page 32).

• Check that the components are connected 

correctly (page 24).

• Select the source component using INPUT 

SELECTOR (page 50).

• Press GUI MODE repeatedly to select 

“GUI ON”.  If the GUI menu still does not 
appear on the TV screen, press MENU.

• Check the TV is connected correctly.