Behringer 802 Benutzerhandbuch

XENYX 502/802/1002/1202 User Manual

XENYX 502/802/1002/1202 User Manual

* 

Terminals marked with this symbol carry electrical current of 
suffi  cient magnitude to constitute risk of electric shock. Use only 
high-quality commercially-available speaker cables with ¼" TS 
plugs pre-installed. All other installation or modifi cation should be 
performed only by qualifi ed personnel.

* 

This symbol, wherever it appears, alerts you to the presence of 
uninsulated dangerous voltage inside the enclosure - voltage that 
may be suffi  cient to constitute a risk of shock.

 

!

This symbol, wherever it appears, alerts you to important operating 
and maintenance instructions in the accompanying literature. 
Please read the manual.

 

!

To reduce the risk of electric shock, do not remove the top cover 
(or the rear section). No user serviceable parts inside. Refer servicing 
to qualifi ed personnel.

 

!

To reduce the risk of fi re or electric shock, do not expose this 
appliance to rain and moisture. The apparatus shall not be exposed 
to dripping or splashing liquids and no objects fi lled with liquids, 
such as vases, shall be placed on the apparatus.

 

!

These service instructions are for use by qualifi ed service personnel 
only. To reduce the risk of electric shock do not perform any 
servicing other than that contained in the operation instructions. 
Repairs have to be performed by qualifi ed service personnel.

Read these instructions.

[1]� 

Keep these instructions.

[2]� 

Heed all warnings.

[3]� 

Follow all instructions.

[4]� 

Do not use this apparatus near water.

[5]� 

Clean only with dry cloth.

[6]� 

Do not block any ventilation openings. Install in accordance 

[7]� 

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat 

[8]� 

registers, stoves, or other apparatus (including amplifi ers) that 
produce heat.

Do not defeat the safety purpose of the polarized or grounding-

[9]� 

type plug. A polarized plug has two blades with one wider 
than the other. A grounding-type plug has two blades and 
a third grounding prong. The wide blade or the third prong 
are provided for your safety. If the provided plug does not fi t 
into your outlet, consult an electrician for replacement of the 
obsolete outlet.

Protect the power cord from being walked on or pinched 

{10}� 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

Use only attachments/accessories specifi ed by 

{11}� 

the manufacturer.

Use only with the cart, stand, tripod, bracket, 

{12}� 

or table specifi ed by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

Unplug this apparatus during lightning 

{13}� 

storms or when unused for long periods of time. 

Refer all servicing to qualifi ed service personnel. Servicing is 

{14}� 

required when the apparatus has been damaged in any way, 
such as power supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate 
normally, or has been dropped.

The apparatus shall be connected to a MAINS socket outlet 

{15}� 

with a protective earthing connection.

Where the MAINS plug or an appliance coupler is used as the 

{16}� 

disconnect device, the disconnect device shall remain 
readily operable.

EN

The microphone channels feature high-end 

XENYX Mic Preamps that compare well with costly 

outboard preamps in terms of sound quality and 

dynamics and boast the following features:

130 dB dynamic range for an incredible amount of 

headroom
A bandwidth ranging from below 10 Hz to over 200 kHz 

for crystal-clear reproduction of even the finest nuances
The extremely low-noise and distortion-free circuitry 

guarantees absolutely natural and transparent signal 
reproduction
They are perfectly matched to every conceivable 

microphone with up to 60 dB gain and +48 volt phantom 
power supply
They enable you to use the greatly extended dynamic 

range of your 24-bit/192-kHz HD recorder to the full, 
thereby maintaining optimal audio quality

“British EQ”
The equalizers used for the XENYX Series are based on 
the legendary circuitry of top-notch consoles made in 
Britain, which are renowned throughout the world for their 
incredibly warm and musical sound character. Even with 
extreme gain settings these equalizers ensure outstanding 
audio properties.

 

!

A mixing console fulfils three main functions:
•  Signal processing: Preamplification, level adjustment, 

mixing of effects, frequency equalization.

•  Signal distribution: Summing of signals to the 

aux sends for effects processing and monitor mix, 
distribution to one or several recording tracks, power 
amp(s), control room and 2-track outputs.

 Setting the volume level, frequency distribution 

and positioning of the individual signals in the stereo 
field, level control of the total mix to match the recording 
devices/crossover/power amplifier(s). All other mixer 
functions can be included in this main function.

The interface of BEHRINGER mixing consoles is optimized for 
these tasks enabling you to easily keep track of the signal path.

The user’s manual is designed to give you both an overview 
of the controls, as well as detailed information on how to use 
them. In order to help you understand the links between the 
controls, we have arranged them in groups according to their 
function. The illustrations at the beginning of each chapter 
show the controls described in each respective chapter.

For the moment, just try and trace the signal path from the 
microphone input to the FX send connector. Don’t be put off 
by the huge range of possibilities; it’s easier than you think! If 
you look at the overview of the controls at the same time, you’ll 
be able to quickly familiarize yourself with your mixing console 
and you’ll soon be making the most of all its many possibilities.
If you need to know more about specific issues, please visit 
our website at http://www.behringer.com, where you’ll 
find explanations of (for example) effects and dynamics 
applications.

Your mixing console was carefully packed in the factory to 
guarantee safe transport. Nevertheless, we recommend that you 
carefully examine the packaging and its contents for any signs of 
physical damage, which may have occurred during transit.

Be sure that there is enough space around the unit for 
cooling purposes and to avoid over-heating please do not 
place your mixing console on high-temperature devices 
such as radiators or power amps. The console is connected 
to the mains via the supplied cable. The console meets 
the required safety standards. Blown fuses must only be 
replaced by fuses of the same type and rating.