Profile PCD970R Benutzerhandbuch

ROUBLE SHOOTING THE SYSTEM

The following chart will help in solving most problems that may occur. Should any problem
persist after you have made these checks, please consult your nearest Profile retailer.
Before going through this check list, refer back to the wiring and operating procedures.

SYMPTOM

CAUSE

SOLUTION

The vehicle's ignition switch

is not on.

Turn the ignition switch to the accessory

position. If there is still no power, check the

fuses at the vehicle's fuse block or the

radio's fuse leads.

The fuse is blown.

Replace the fuse with another fuse of the

same recommended value

There is a disc already in

the player.

Remove the disc in the player, then put in

the new one.

You are trying to put the

compact disc in upside down.

Insert the compact disc with the label facing

up.

The compact disc is

extremely dirty or

defective.

Clean the compact disc with a compact disc

cleaning solution or replace the defective

compact disc.

The temperature in the car

is too hot.

Cool the inside of the vehicle, then try again.

Condensation build-up on the

inside of the unit.

Leave the disc player off and turn the

vehicle's air conditioner on to remove the

condensation build-up inside the unit.

The volume control is all the

way down.

Adjust the volume control.

The speakers are bad.

Test the speakers to determine if they need

replacing.

The function

buttons do

not work.

The built-in microprocessor

is operating incorrectly.

Remove the disc, then re-insert it. Press the

reset button .

No Power

Disc cannot

be loaded or

ejected.

No sound.

New installation.

Press the RESET button.

E 1~ E 10

The unit cannot be operated because of trouble. Press the "RESET"
button . If the indicator still appears after pressing the "RESET"
button , your unit needs repair. Please refer to the warranty section
of this manual for details on getting the unit serviced.

ERROR CODES