Sony XR-6759RDS Benutzerhandbuch

Seite von 20
10
Actual total number:
Sony XR-6759RDS (
E
) 3-810-237-11 (1)
EN
Note
You cannot use this function in some countries where no
PTY (Programme Type selection) data is available.
1
Press (PTY) during FM reception until
“PTY” lights up on the display.
The current programme type name appears
if the station is transmitting the PTY data.
“- - - - -” appears if the received station is
not an RDS station or if the RDS data has
not been received.
2
Press (PTY) repeatedly until the desired
programme type appears.
The programme types appear in the order
as shown in the above table.  Note that you
cannot select “NONE” (Not specified) for
searching.
Locating a station by
programme type
You can locate the station you want by
selecting one of the programme type shown
below.
Note
In the countries or regions where EON data is not
transmitted, you can use this function only for the stations
you have tuned in once.
Programme types
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Popular Music
Rock Music
Middle of the Road Music
Light Classical
Classical
Other Music Type
Not specified
Display
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER M
NONE
   INFO
  SPORT
Presetting the RDS
stations with AF and TA
data
When you preset the RDS stations, the unit
stores each station’s data as well as its
frequency, so you don’t have to turn on the AF
or TA function every time you tune in the
preset station.  You can select different setting
(AF, TA, or both) for individual preset stations,
or the same setting for all preset stations.
Presetting the same setting for all
preset stations
1
Select an FM band.
2
Press (AF/TA) repeatedly and select
either “AF“, “TA” or “AF TA” (for both AF
and TA functions).
Note that turning the “AF TA” function off
stores RDS stations as well as non-RDS FM
stations.
3
Press (SENS/BTM) for two seconds.
Presetting different settings for
each preset station
1
Select an FM band, and tune in the
desired station.
2
Press (AF/TA) repeatedly and select
either “AF“, “TA” or “AF TA” (for both AF
and TA functions).
3
Press the desired preset number button
for two seconds until a beep sounds.
Repeat from step 1 for presetting other
stations.
Tip
If you want to change the preset AF and/or TA setting
after you tuned in the preset station,  you can do so by
turning on/off the AF or TA function.