Sony XR-5800R Benutzerhandbuch

The rotary commander works by pressing
buttons and/or rotating controls.

By pressing buttons (the SOURCE
and the MODE buttons)

Every time you press (SOURCE), the
source changes as follows:

TAPE ˜ TUNER

Pressing (MODE) changes the operation in the
following ways:

• the tape transport.
• the band, FM1 n FM2 n FM3 n MW n LW.

Tip
You can turn on this unit by pressing (SOURCE) on the
rotary commander.

By rotating the control (the SEEK/
AMS control)

Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the

tape. Rotate and hold the control, and

release it to fast-wind the tape. To

playback, rotate and hold the control

again, and release it.

• Tune in the stations automatically.

Rotate and hold the control to tune in the

specific station.

OFF

Press(OFF) to turn
off the unit.

Press (SEL)

(SOURCE)

(MODE)

Press (DSPL) to change the
displayed items.

By rotating the control while

pushing in (the PRESET control)

Push in and rotate the control to:
Receive the stations memorized on the
preset buttons.

Other operations

Changing the operative direction

The operative direction of controls is factory

preset as in the illustration below.

If you need to mount the rotary commander

on the right side of the steering column, you
can reverse the controls operative direction.

Press (SEL) for two seconds while
pushing in the VOL control.

RDS/Other Functions

Press(ATT) to
attenuate the
sound.