Sony XR-C400 Handbuch

Sony XR-C400 (

) 3-810-309-11 (2)

  BANK ON

CD1

BANK

You can select:
• BANK ON to play the tracks with “PLAY”

setting.

• BANK INV to play the tracks with “SKIP”

setting.

During playback, press (4).
“BANK” appears on the display.

Press (4) to select the desired mode.
Each time you press (4) , the display
changes as follows:

z BANK ON

z BANK INV

Z

Playback starts from the track following the
current one.

To go back to the normal playing mode, select
“BANK OFF” in step 2.

•

 If your car was parked in direct sunlight

resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.

•

 If no power is being supplied to the unit,

check the connections first. If everything is in
order, check the fuse.

•

 If no sound comes from the speakers of a

2-speaker system, set the fader control to the
center position.

If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

•

 Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•

 Keep cassettes away from equipment with

built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.

•

 Do not expose cassettes to direct sunlight,

extremely cold temperatures or moisture.

•

 When the tape is played back for a long

period, the cassette shell may become warm
because of the built-in power amplifier.
However, this is not a sign of a malfunction.

Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tapes used for these cassettes are
very thin and tend to be stretched easily.
Frequent playing and stopping of these tapes
may cause them to be pulled into the cassette
deck mechanism.

CD Changer