Sony XR-C6090 Benutzerhandbuch
10
EN
OFF
Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the
release it to:
• Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
• Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
specific point in a track, then release it to
start playback.
• Tune in the stations automatically.
Rotate and hold the control to tune in the
specific station.
specific station.
By rotating the control while
pushing in (the PRESET/DISC
control)
pushing in (the PRESET/DISC
control)
Push in and rotate the control to:
• Receive the stations memorized on the
• Receive the stations memorized on the
preset buttons.
• Change the disc.
Other operations
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
preset as in the illustration below.
If you need to mount the rotary commander
on the right side of the steering column, you
can reverse the controls operative direction.
on the right side of the steering column, you
can reverse the controls operative direction.
Press (SEL) for two seconds while
pushing in the VOL control.
pushing in the VOL control.
Adjusting the sound
characteristics
characteristics
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE (treble)
n
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE (treble)
n
BAL (left-right) n FAD (front-rear)
2
Adjust the selected item by pressing
either (+) or (–).
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
(After three seconds the button will again
serve as the volume control button.)
Attenuating the sound
Press (ATT).
The “ATT” indication flashes.
The “ATT” indication flashes.
To restore the previous volume level, press
again.
again.
Tip
The unit decreases the volume automatically when a
telephone call comes in (Telephone-ATT function).
The unit decreases the volume automatically when a
telephone call comes in (Telephone-ATT function).
Press(OFF) to
turn off the unit.
turn off the unit.
Rotate the VOL control
to adjust the volume.
to adjust the volume.
Press (ATT) to
attenuate the
sound.
attenuate the
sound.
Press (LIST) to display
memorised names.
memorised names.
Press (SEL)
to adjust
and select.
to adjust
and select.
To increase
To decrease