Sony XR-C900RDS Benutzerhandbuch

Seite von 106
32
EN
Cause/Solution
The volume of the rear speakers may have been automatically
lowered in order to maximize the effect of the listening position
adjustment.
n Rotate the dial in a clockwise direction to adjust the balance.
The speaker balance can be set separately for the DSP on
mode and DSP off mode (page 23).
Problem
No sound, or sound is too low.
DSP functions
Error displays (when the optional CD/MD changer is connected)
The following indications flashes for about five seconds, and an alarm sound will be heard.
Display
Solution
Insert the disc magazine with discs
into the CD/MD changer.
Insert the discs in the CD/MD
changer.
Clean or insert the CD correctly.
Insert another MD.
Playback an MD with recorded
tracks on it.
Press the reset button of the unit.
Close the lid or inserted the MDs
properly.
Wait until the temperature goes
down below 50°C.
*
1
Blank
NO Disc
NO Mag
Cause
The disc magazine is not inserted
in the CD/MD changer.
No disc is inserted in the CD/MD
changer.
A CD is dirty or inserted upside
down.*
2
An MD does not play because of
some problem.*
2
No tracks have been recorded on
an MD.*
2
The CD/MD changer cannot be
operated because of some problem.
The lid of the MD changer is open
or MDs are not inserted properly.
The ambient temperature is more
than 50°C.
*
1
When an error occurs during playback of an MD or CD, the disc number of the MD or CD does not appear in the display.
*
2
The disc number of the disc causing the error appears in the display.
If the above-mentioned solutions do not help improve the situation, consult your nearest Sony
dealer.
Not ready
High temp
*
1
Error
Push reset