Panasonic SC-HC58DB Benutzerhandbuch

RQT9756

≥ Confirm the network connection and settings. (

l 7)

≥ Your wireless network might be set to be invisible. In this case 

select “Manual settings” in “Method 3”. (l 9)

≥ This unit cannot join a wireless network using WEP security 

settings with the WPS methods (“Method 2”). Use “Method 3” to 
join the wireless network. (l 8)

≥ Make sure that the multicast function on the wireless network 

router is set to on (enabled).

≥ When “D.CONNECT” is used, if the password for “D.CONNECT” 

has been changed connect the other device to this unit using the 
new password. (l 11)

≥ Display the wireless network name that this unit is connected to 

and make sure that the device is connected to the same network. 
(l 7)

≥ If “NET STNBY” is set to “OFF”, the AirPlay compatible device 

cannot be connected when this unit is off.

≥ Turn off the Wi-Fi setting on the AirPlay compatible device, set 

“NET STNBY” to “OFF” (l 20) and then turn this unit off and on. 

Reconnect the compatible device to the Wi-Fi network and then 
select this unit as the AirPlay speakers again.

≥ If the network is set to be invisible, the push button configuration 

does not work. In this case, either make the wireless network 
visible while you set up the network for this unit or use “Method 1” 
or “Method 3”. (l 7, 8)

≥ Simultaneous use with other 2.4 GHz devices, such as 

microwaves, cordless telephones, etc., may result in connection 
interruptions.
Increase the distance between this unit and these devices.

≥ Do not place this unit inside a metal cabinet, for it might block the 

Wi-Fi signal.

≥ Place this unit closer to the wireless network router.
≥ If “D.CONNECT” is set to “ON”, place the AirPlay compatible 

device closer to this unit.

≥ If several wireless devices are simultaneously using the same 

wireless network as this unit, try turning off the other devices or 
reducing their wireless network usage.

≥ If the playback stops, check the playback status on the iOS device 

or iTunes.

≥ If play does not start (even though the Wi-Fi status indicator lights 

in blue and the AirPlay 

 icon is displayed), restart the wireless 

network router, turn the Wi-Fi connection on the iOS device or 
Mac/PC off and on, and then make sure that your home wireless 
network is selected.

≥ If the AirPlay 

 icon is not displayed even if Wi-Fi status 

indicator lights in blue, try restarting the wireless network router.

≥ With some iOS and iTunes versions, it may not be possible to 

restart the AirPlay playback if the selector is changed (e.g., “CD”) 
or the unit is turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the 
Music App or iTunes and then re-select this unit as the output 
speakers. (l 10)

≥ Check the Bluetooth

®

 device condition.

≥ The pairing of the device was unsuccessful or the registration has 

been replaced. Try pairing the device again. (l 12)

≥ This unit might be connected to a different device. Disconnect the 

other device and try pairing the device again. (l 12)

≥ For some built-in Bluetooth

®

 devices, you have to set the audio 

output to “SC-HC58” manually. Read the operating instructions for 
the device for details.

≥ The device is out of the 10 m communication range. Bring the 

Bluetooth

®

 device closer to this unit.

≥ Remove any obstacle between this unit and the device.
≥ Other devices that use the 2.4 GHz frequency band (wireless 

router, microwaves, cordless phones, etc.) are interfering. Bring 
the Bluetooth

®

 device closer to this unit and distance it from the 

other devices.

≥ Select “MODE 1” for stable communication. (

l 12)

≥ The remote control and this unit are using a different code. 

(l 23, “REMOTE ”)

≥ Is the battery depleted or is the battery inserted incorrectly? (

l 4)

SC-HC58DBEB_DBGN_GS~RQT9756-B.book  22 ページ  ２０１３年１月２９日　火曜日　午前１０時１２分