Sony SA-NS510 Benutzerhandbuch

Seite von 60
17
GB
G
e
ttin
g
 S
ta
rte
d
Preparing the Unit
\
1
Connect the AC power cord to 
the AC adaptor.
2
Plug the connector of the AC 
adaptor into the DC IN terminal 
on the unit.
3
Plug the AC power cord to a 
wall outlet (the mains).
Note
Depending on the unit temperature, you may be 
unable to use the unit or the power may turn off 
automatically to protect the unit. If temperature is 
too high, leave the power off and wait until the unit 
temperature goes down. If you turn on the power 
without letting the unit cool sufficiently, the power 
may turn off again or you may be unable to operate 
the unit.
The built-in battery allows you to use this unit 
without connecting the AC power cord.
1
Connect the unit to an AC 
power source.
2
Set the OPERATE ON/OFF 
switch to ON to start charging. 
Charging time depends on what mode the 
unit is in. Refer to “Charging time:” 
(page 39).
Notes
• When the OPERATE ON/OFF switch to OFF, the 
built-in battery is not charged even if the unit is 
connected to an AC power source.
• If you charge the unit after it has not been used for 
a long time, you may be unable to charge it to the 
proper capacity the first time. This is due to the 
battery characteristics, and is not a malfunction. 
Charge the unit again.
Connecting to an AC power 
source
AC power cord
AC adaptor
Using the unit with the built-in 
battery