Sony SA-NS510 Benutzerhandbuch

Seite von 60
35
GB
Ot
h
e
rs
When another device (PARTY host) 
is having a PARTY, press 
PARTY START/CLOSE.
The unit joins the PARTY as a PARTY guest 
and the PARTY STREAMING indicator 
lights up in amber.
To leave a PARTY
Press PARTY
START/CLOSE.
The PARTY STREAMING indicator goes off.
Notes
• An error has occurred when the PARTY 
STREAMING indicator lights up in red. Perform 
the process from step 1 again.
• The PARTY STREAMING indicator lights up in 
amber when other devices utilizing the PARTY 
STREAMING function invite this unit to a 
PARTY. When you want to leave that PARTY, 
press PARTY.
• You cannot join a PARTY in the following cases:
– you have a PARTY on this unit
– you have already joined in another PARTY
• If you press PARTY
START/CLOSE when no 
PARTY is being held, but a device that complies 
with the PARTY STREAMING function is 
playing, the device will be the PARTY host and the 
unit will join the PARTY as a PARTY guest.
To use the PARTY STREAMING 
function with a Network Audio 
Remote
You can use a Network Audio Remote that 
supports the PARTY STREAMING function 
to use the unit to start a PARTY that is being 
held by other devices.
Updating software
When a new update is available, the UPDATE 
indicator lights up in green while the unit is 
connected to the Internet.
Check the following customer support website 
about the update:
http://www.sony.net/sans
Notes
• Perform the following operations after confirm the 
• Make sure you do not attempt any of the following 
operations while the update is in progress.
– Turning the unit off
– Connecting or disconnecting the network (LAN) 
cable (not supplied)
– Disconnecting the AC adaptor
• About connecting the fixed IP address and setting 
of the proxy server, display the Setting Screen on a 
browser and set these referring to “Option 
3:Manual setting method using an Access Point 
Scan (for PC/Mac)” (page 21).
1
Quit all operations before 
updating.
Tip
If you do not quit those, the unit will quit or 
stop all operations automatically.
2
Press and hold the UPDATE 
button on the rear of the unit 
until the illumination is turned 
off.
The update starts.
The UPDATE indicator flashes during 
the update.