Sony SNP-3350 Benutzerhandbuch
NETWORK PTZ CAMERA
User Guide
26
NETWORK PTZ CAMERA
User Guide
27
Chapter 3. Installing Camera & Network Setup
Connect the cable to the camera’s rear video output terminal and the monitor's video input
terminal.
• The wiring varies depending on your monitor type and peripheral devices; please refer to the user manual for each device.
• Please make sure the monitor and camera are turned off when connecting them.
• As shown in the picture below, set the 75Ω/Hi-Z switch of each device to Hi-Z for the intermediate video receiver and to 75Ω
for the end device.
for the end device.
3.4. Connecting Monitor
37x/33x PTZ Network Camera
SNP-3750/3350
SNP-3750/3350
Monitor
End Device
intermediate
Video Receiver
• This product is a network camera that transfers video over a network; the video output terminal is
used to set the imaging range of the camera at installation.
• Using the terminal for monitoring purposes may cause problems such as degradation in video
quality.
Caution
For installation guidelines for brackets and housings, refer to the installation manual that is
enclosed with the bracket or housing.
3.5. Preparing & Installing Camera Bracket
SNR-6400/3200
LAN
Internet
Internet
PC Web View
PC Web View
SCC-3100A
CONTROLLER (SUB)
SCC-3100A
CONTROLLER (MAIN)
RJ45 Cable
Control
Connection